"

jv:libgdbs - GNU Debugger Interface Library

Copyright (C) 2015-now Jan Vrany

This library is free software; you can redistribute it and/or

modify it under the terms of the GNU Lesser General Public

License as published by the Free Software Foundation; either

version 2.1 of the License. 

This library is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public

License along with this library; if not, write to the Free Software

Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

"

"{ Package: 'jv:libgdbs' }"

"{ NameSpace: Smalltalk }"

GDBMICommand subclass:#GDBMI_trace_frame_collected

	instanceVariableNames:''

	classVariableNames:''

	poolDictionaries:''

	category:'GDB-Core-Commands-MI'

!

!GDBMI_trace_frame_collected class methodsFor:'documentation'!

copyright

"

jv:libgdbs - GNU Debugger Interface Library

Copyright (C) 2015-now Jan Vrany

This library is free software; you can redistribute it and/or

modify it under the terms of the GNU Lesser General Public

License as published by the Free Software Foundation; either

version 2.1 of the License. 

This library is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU

Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public

License along with this library; if not, write to the Free Software

Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA

"

!

documentation

"

The `-trace-frame-collected' Command

------------------------------------

Synopsis

........

      -trace-frame-collected

         [--var-print-values VAR_PVAL]

         [--comp-print-values COMP_PVAL]

         [--registers-format REGFORMAT]

         [--memory-contents]

   This command returns the set of collected objects, register names,

trace state variable names, memory ranges and computed expressions that

have been collected at a particular trace frame.  The optional

parameters to the command affect the output format in different ways.

See the output description table below for more details.

   The reported names can be used in the normal manner to create

varobjs and inspect the objects themselves.  The items returned by this

command are categorized so that it is clear which is a variable, which

is a register, which is a trace state variable, which is a memory range

and which is a computed expression.

   For instance, if the actions were

     collect myVar, myArray[myIndex], myObj.field, myPtr->field, myCount + 2

     collect *(int*)0xaf02bef0@40

the object collected in its entirety would be `myVar'.  The object

`myArray' would be partially collected, because only the element at

index `myIndex' would be collected.  The remaining objects would be

computed expressions.

   An example output would be:

     (gdb)

     -trace-frame-collected

     ^done,

       explicit-variables=[{name='myVar',value='1'}],

       computed-expressions=[{name='myArray[myIndex]',value='0'},

                             {name='myObj.field',value='0'},

                             {name='myPtr->field',value='1'},

                             {name='myCount + 2',value='3'},

                             {name='$tvar1 + 1',value='43970027'}],

       registers=[{number='0',value='0x7fe2c6e79ec8'},

                  {number='1',value='0x0'},

                  {number='2',value='0x4'},

                  ...

                  {number='125',value='0x0'}],

       tvars=[{name='$tvar1',current='43970026'}],

       memory=[{address='0x0000000000602264',length='4'},

               {address='0x0000000000615bc0',length='4'}]

     (gdb)

   Where:

`explicit-variables'

     The set of objects that have been collected in their entirety (as

     opposed to collecting just a few elements of an array or a few

     struct members).  For each object, its name and value are printed.

     The `--var-print-values' option affects how or whether the value

     field is output.  If VAR_PVAL is 0, then print only the names; if

     it is 1, print also their values; and if it is 2, print the name,

     type and value for simple data types, and the name and type for

     arrays, structures and unions.

`computed-expressions'

     The set of computed expressions that have been collected at the

     current trace frame.  The `--comp-print-values' option affects

     this set like the `--var-print-values' option affects the

     `explicit-variables' set.  See above.

`registers'

     The registers that have been collected at the current trace frame.

     For each register collected, the name and current value are

     returned.  The value is formatted according to the

     `--registers-format' option.  See the `-data-list-register-values'

     command for a list of the allowed formats.  The default is `x'.

`tvars'

     The trace state variables that have been collected at the current

     trace frame.  For each trace state variable collected, the name and

     current value are returned.

`memory'

     The set of memory ranges that have been collected at the current

     trace frame.  Its content is a list of tuples.  Each tuple

     represents a collected memory range and has the following fields:

    `address'

          The start address of the memory range, as hexadecimal literal.

    `length'

          The length of the memory range, as decimal literal.

    `contents'

          The contents of the memory block, in hex.  This field is only

          present if the `--memory-contents' option is specified.

{No value for `GDBN'} Command

.............................

There is no corresponding {No value for `GDBN'} command.

Example

.......

-trace-list-variables

---------------------

Synopsis

........

      -trace-list-variables

   Return a table of all defined trace variables.  Each element of the

table has the following fields:

`name'

     The name of the trace variable.  This field is always present.

`initial'

     The initial value.  This is a 64-bit signed integer.  This field

     is always present.

`current'

     The value the trace variable has at the moment.  This is a 64-bit

     signed integer.  This field is absent iff current value is not

     defined, for example if the trace was never run, or is presently

     running.

{No value for `GDBN'} Command

.............................

The corresponding {No value for `GDBN'} command is `tvariables'.

Example

.......

     (gdb)

     -trace-list-variables

     ^done,trace-variables={nr_rows='1',nr_cols='3',

     hdr=[{width='15',alignment='-1',col_name='name',colhdr='Name'},

          {width='11',alignment='-1',col_name='initial',colhdr='Initial'},

          {width='11',alignment='-1',col_name='current',colhdr='Current'}],

     body=[variable={name='$trace_timestamp',initial='0'}

           variable={name='$foo',initial='10',current='15'}]}

     (gdb)

-trace-save

-----------

Synopsis

........

      -trace-save [-r ] FILENAME

   Saves the collected trace data to FILENAME.  Without the `-r'

option, the data is downloaded from the target and saved in a local

file.  With the `-r' option the target is asked to perform the save.

{No value for `GDBN'} Command

.............................

The corresponding {No value for `GDBN'} command is `tsave'.

-trace-start

------------

Synopsis

........

      -trace-start

   Starts a tracing experiments.  The result of this command does not

have any fields.

{No value for `GDBN'} Command

.............................

The corresponding {No value for `GDBN'} command is `tstart'.

-trace-status

-------------

Synopsis

........

      -trace-status

   Obtains the status of a tracing experiment.  The result may include

the following fields:

`supported'

     May have a value of either `0', when no tracing operations are

     supported, `1', when all tracing operations are supported, or

     `file' when examining trace file.  In the latter case, examining

     of trace frame is possible but new tracing experiement cannot be

     started.  This field is always present.

`running'

     May have a value of either `0' or `1' depending on whether tracing

     experiement is in progress on target.  This field is present if

     `supported' field is not `0'.

`stop-reason'

     Report the reason why the tracing was stopped last time.  This

     field may be absent iff tracing was never stopped on target yet.

     The value of `request' means the tracing was stopped as result of

     the `-trace-stop' command.  The value of `overflow' means the

     tracing buffer is full.  The value of `disconnection' means

     tracing was automatically stopped when {No value for `GDBN'} has

     disconnected.  The value of `passcount' means tracing was stopped

     when a tracepoint was passed a maximal number of times for that

     tracepoint.  This field is present if `supported' field is not `0'.

`stopping-tracepoint'

     The number of tracepoint whose passcount as exceeded.  This field

     is present iff the `stop-reason' field has the value of

     `passcount'.

`frames'

`frames-created'

     The `frames' field is a count of the total number of trace frames

     in the trace buffer, while `frames-created' is the total created

     during the run, including ones that were discarded, such as when a

     circular trace buffer filled up.  Both fields are optional.

`buffer-size'

`buffer-free'

     These fields tell the current size of the tracing buffer and the

     remaining space.  These fields are optional.

`circular'

     The value of the circular trace buffer flag.  `1' means that the

     trace buffer is circular and old trace frames will be discarded if

     necessary to make room, `0' means that the trace buffer is linear

     and may fill up.

`disconnected'

     The value of the disconnected tracing flag.  `1' means that

     tracing will continue after {No value for `GDBN'} disconnects, `0'

     means that the trace run will stop.

`trace-file'

     The filename of the trace file being examined.  This field is

     optional, and only present when examining a trace file.

{No value for `GDBN'} Command

.............................

The corresponding {No value for `GDBN'} command is `tstatus'.

-trace-stop

-----------

Synopsis

........

      -trace-stop

   Stops a tracing experiment.  The result of this command has the same

fields as `-trace-status', except that the `supported' and `running'

fields are not output.

{No value for `GDBN'} Command

.............................

The corresponding {No value for `GDBN'} command is `tstop'.

"

! !

!GDBMI_trace_frame_collected methodsFor:'accessing'!

operation

	^ 'trace-frame-collected'

! !