Makefiles: compile 32bit Winsows with `-O0`
This is a horrible hack - on i686 St/X is known to crash when
compiled with -O2 using GCC >9. To circumvent this, compile 32bit
version with `-O0` which is known to work.
Naturally, this is horrible hack, but in the past, people made so
many "cool optimizations" on i686 only that they break with every
new GCC (UB). There are so many it would take significant effort
to clean up. And there's little gain from that as of today (Dec 2020).
So, sorry for that, but no optimizations on 32bit Windows.
#
# $Header: /cvs/stx/stx/rules/stdHeader_bc,v 1.197 2017-06-14 13:36:25 cg Exp $
#
# MIMEType: application/x-make
# EOLMode: msdos
#
# The name of this rules file is now misleading; it used to be used only for
# borland, but now also contains visualC and other compiler definitions.
# actually, it is used for all Windows builds.
#
# defaults to borland-build (USEBC=1), unless invoked with any of:
# USEVC=1 - visualC-make
# USELCC=1 - lcc make (suspended work - unfinished)
# USETCC=1 - tiny-C (tcc) (suspended work - unfinished)
# USEMINGW64=1 - mingw-C (ongoing work)
!ifndef BUILD_TARGET
! ifdef USEMINGW32
BUILD_TARGET = i686-pc-mingw32
! else
! ifdef USEMINGW64
BUILD_TARGET = x86_64-w64-mingw32
! else
BUILD_TARGET = unknown-unknown-unknown
! endif
! endif
!endif
!ifdef USEVC
! undef USEBC
!endif
# use borland-cc by default
!ifndef USEBC
! ifndef USEVC
! ifndef USELCC
! ifndef USETCC
! ifndef USEMINGW32
! ifndef USEMINGW64
USEBC=1
! endif
! endif
! endif
! endif
! endif
!endif
MAKENSIS=makensis
MAKENSIS=c:\programme\nsis\makensis
MAKENSIS="$(PROGRAMFILES)\nsis\makensis.exe"
#STC_MSGFORMAT= -messageFormat: gcc
STC_MSGFORMAT= -messageFormat: gcc-jenkins
COMMONSYMBOLS=+commonSymbols
# uncomment this, if the stc compiled C files should be kept for debugging
# KEEPCFILE=1
# borland cbuilder version
CBUILDER5=1
#CBUILDER6=1
!ifdef WINVER_5
IPHLPAPI_LIB=iphlpapi.lib
!else
IPHLPAPI_LIB=
!endif
# all compiler specific libs are now under lib (used to be at top level)
LIBDIR_PARENT=lib
#
# extensions
#
O=obj
H=STH
RES=res
MAKE=make.exe
!ifdef USEBC
# ----------------
# Borland C
# ----------------
# LIBDIR: final destination directory for lib's lib\bc, lib\vc, lib\lcc etc.
# OUTDIR: temporary output directory (path) .\objbc\ .\objvc\ .\objlc\
# OBJDIR: name of object directory (not path) - objbc, objvc or objlc
LIBDIR_NAME=$(LIBDIR_PARENT)\bc
LIBDIR=$(TOP)\$(LIBDIR_NAME)
LIBDIR_LIBRUN=$(LIBDIR)
OBJDIR=objbc
OBJDIR_LIBRUN=$(OBJDIR)
OUTDIR=objbc\\
# the stxc32i is a stripped down version
# of the original cw32i for CBuilder3
#
# cs32i is for CBuilder4
#
# CAUTION:
# We need special build borland libraries for STX/X,
# (they have to be linked to a different base address).
# Look into support\win32\borland\not_delivered for more information
# and build procedures. The generated libraries are in support\win32\borland.
# CBUILDER5
# RT_LIB = cs32mt.lib
# The libraries from BCC 5.1 have not yet been adapted,
# don't use them!
#RT_LIB = cw32i.lib
#RT_DLL = cc3250.dll
# Use libraries from BCC 4
RT_LIB = cs32i.lib
RT_DLL = cs3245.dll
X11_DLL = X11.dll
XEXT_DLL = Xext.dll
#
# where are the bctools ?
#
! ifndef BCB
# BCB = $(MAKEDIR)\..
BCB=c:\Borland\bcc55
! endif
# FOR BORLAND default (as installed, in path)
# CC=bcc32.exe
# RC=brcc32 -DWIN32
# LINK32=ilink32.exe
# FOR BORLAND 5.5 (CBuilder5, free command line tools)
# BCB=c:\Borland\bcc55
# FOR BORLAND 5.6 (CBuilder6)
# BCB=c:\Borland\bcc56
CC=$(BCB)\bin\bcc32.exe
RC=$(BCB)\bin\brcc32 -DWIN32
LINK32=$(BCB)\bin\ilink32.exe
LIB32=$(BCB)\bin\tlib.exe
AS=tasm32.exe
MAKE_BAT=bmake
USE_ARG=-DUSEBC
APP_LINKER=$(LINK32)
# APP_LFLAGS = -L$(LIBDIR);$(BCB)\lib;$(DEBUGLIBPATH) -H:0x400000 -Hc:0x100000 -S:0x40000 -Sc:0x10000 -ap -Tpe -x -Gn -v -Ao:0x10000
APP_LFLAGS = -L$(LIBDIR);$(BCB)\lib -S:0x40000 -Sc:0x10000 -Tpe -x -Gn -v -Ao:0x10000
APP_RT_LIB=
APP_IMPORTLIBS=import32.lib
CRT_STARTUP_CONSOLE=c0x32.obj
CRT_STARTUP_NOCONSOLE=c0w32.obj
LFLAGS_CONSOLE=-ap
LFLAGS_NOCONSOLE=-aa
!else
! ifdef USEVC
# ----------------
# MS visual c
# ----------------
# !MESSAGE WINDOWSSDKDIR is $(WINDOWSSDKDIR)
# !MESSAGE VSINSTALLDIR is $(VSINSTALLDIR)
LIBDIR_NAME=$(LIBDIR_PARENT)\vc
LIBDIR=$(TOP)\$(LIBDIR_NAME)
# LIBDIR=$(TOP)\librun\Debug
LIBDIR_LIBRUN=$(LIBDIR)
OBJDIR=objvc
OBJDIR_LIBRUN=$(OBJDIR)
OUTDIR=objvc\\
! if "$(WINDOWSSDKDIR)x" == "x"
SDK6=$(PROGRAMS)\Microsoft SDKs\Windows\v6.0A
SDK70a=$(PROGRAMS)\Microsoft SDKs\Windows\v7.0A
SDK70a_x86=$(PROGRAMS86)\Microsoft SDKs\Windows\v7.0A
SDK71=$(PROGRAMS)\Microsoft SDKs\Windows\v7.1
SDK71_x86=$(PROGRAMS86)\Microsoft SDKs\Windows\v7.1
SDK=$(SDK71_x86)\\
SDK=$(SDK70a_x86)\\
!MESSAGE WINDOWSSDKDIR not set; assuming $(SDK)...
! else
SDK=$(WINDOWSSDKDIR)
! endif
! if "$(VSINSTALLDIR)x" == "x"
!ERROR VSINSTALLDIR not set. Please call the appropriate setup script (typically: C:\Program Files\Microsoft Visual Studio 10.0\VC\bin\vcvars32.bat)
# VSINSTDIR=%ProgramFiles%\Microsoft Visual Studio 8\\
# VSINSTDIR=%ProgramFiles%\Microsoft Visual Studio 9.0\\
VSINSTDIR=%ProgramFiles%\Microsoft Visual Studio 10.0\\
! else
VSINSTDIR=$(VSINSTALLDIR)
! endif
VCINSTALLDIR=$(VSINSTDIR)VC
VCBINDIR=$(VCINSTALLDIR)\bin\\
VCLIBDIR=$(VCINSTALLDIR)\lib\\
VS80COMNTOOLS=$(VSINSTDIR)Common7\Tools\\
WINDOWSKIT=c:\Program Files (x86)\Windows Kits\10\Include\10.0.10150.0\ucrt
INCLUDE_WINDOWSKIT=-I"$(WINDOWSKIT)"
# VCBINDIR=
LINK32="$(VCBINDIR)link.exe"
CC="$(VCBINDIR)cl.exe"
LIB32="$(VCBINDIR)lib.exe"
MAKE_BAT=vcmake
MAKE=make.exe
USE_ARG=-DUSEVC
RC="$(SDK)bin\rc.exe"
APP_LINKER=$(LINK32)
CRT_STARTUP_CONSOLE=
CRT_STARTUP_NOCONSOLE=
LFLAGS_CONSOLE=/nologo /DEBUG /DYNAMICBASE:NO /MACHINE:X86 /ERRORREPORT:PROMPT
LFLAGS_NOCONSOLE=/nologo /DEBUG /DYNAMICBASE:NO /MACHINE:X86 /ERRORREPORT:PROMPT
APP_RT_LIB=
APP_IMPORTLIBS=kernel32.lib
! else
! ifdef USELCC
# ------------
# lcc compiler
# ------------
LIBDIR_NAME=$(LIBDIR_PARENT)\lcc
LIBDIR=$(TOP)\$(LIBDIR_NAME)
LIBDIR_LIBRUN=$(TOP)\$(LIBDIR_PARENT)\vc
LIBDIR_LIBRUN=$(LIBDIR)
OBJDIR=objlcc
OBJDIR_LIBRUN=objvc
OUTDIR=objlcc\\
LCCDIR=c:\lcc
LCCBINDIR=$(LCCDIR)\bin
CC=$(LCCBINDIR)\lcc.exe
RC=$(LCCBINDIR)\lrc
LINK32=$(LCCBINDIR)\lcclnk.exe
LINK32_DLL=$(LCCBINDIR)\lcclnk.exe
MAKE_BAT=lccmake
USE_ARG=-DUSELCC
APP_LINKER=$(LINK32)
# APP_LFLAGS = -L$(LIBDIR);$(BCB)\lib;$(DEBUGLIBPATH) -H:0x400000 -Hc:0x100000 -S:0x40000 -Sc:0x10000 -ap -Tpe -x -Gn -v -Ao:0x10000
CRT_STARTUP_CONSOLE=
CRT_STARTUP_NOCONSOLE=
LFLAGS_DLL=-dll
LFLAGS_CONSOLE=
LFLAGS_NOCONSOLE=
APP_RT_LIB=
APP_IMPORTLIBS=kernel32.lib
! else
! ifdef USETCC
# ------------
# tcc compiler
# ------------
O=o
LIBDIR_NAME=$(LIBDIR_PARENT)\tcc
LIBDIR=$(TOP)\$(LIBDIR_NAME)
# LIBDIR=$(TOP)\librun\Debug
LIBDIR_LIBRUN=$(TOP)\$(LIBDIR_PARENT)\vc
OBJDIR=objtcc
OBJDIR_LIBRUN=objvc
OUTDIR=objtcc\\
TCCDIR=$(TOP)\support\tcc
CC=$(TCCDIR)\tcc.exe
LINK32=$(TCCDIR)\tcc.exe
MAKE_BAT=tccmake
USE_ARG=-DUSETCC
APP_LINKER=$(LINK32)
# APP_LFLAGS = -L$(LIBDIR);$(BCB)\lib;$(DEBUGLIBPATH) -H:0x400000 -Hc:0x100000 -S:0x40000 -Sc:0x10000 -ap -Tpe -x -Gn -v -Ao:0x10000
CRT_STARTUP_CONSOLE=
CRT_STARTUP_NOCONSOLE=
LFLAGS_CONSOLE=
LFLAGS_NOCONSOLE=
APP_RT_LIB=
APP_IMPORTLIBS=kernel32.lib
! else
! if defined(USEMINGW32) || defined(USEMINGW64)
# ------------
# mingw gcc compiler
# ------------
LIBDIR_NAME=$(LIBDIR_PARENT)\mingw
LIBDIR=$(TOP)\$(LIBDIR_NAME)
# LIBDIR=$(TOP)\librun\Debug
LIBDIR_LIBRUN=$(TOP)\$(LIBDIR_PARENT)\mingw
OBJDIR=objmingw
OBJDIR_LIBRUN=objmingw
OUTDIR=objmingw/
! ifndef MINGW_DIR
echo "MINGW_DIR is not set"
MINGW_DIR="C:\\MINGW"
! endif
# do not quote here;
# must already be quoted in the shell-env, if it contains spaces (program files\...)
MINGWDIR=$(MINGW_DIR)
MINGWBINDIR=$(MINGWDIR)\bin
MINGWLIBDIR=$(MINGWDIR)\lib
CC=$(MINGWBINDIR)\gcc.exe
# LINK32=$(MINGWBINDIR)\ld.exe
LINK32=$(CC)
LINK32_DLL=$(CC)
MAKE_BAT=mingwmake
RC=$(MINGWBINDIR)\windres
RFLAGS=
RES=$(O)
APP_LINKER=$(CC)
STRIP=$(MINGWBINDIR)\strip.exe
OBJCOPY=$(MINGWBINDIR)\objcopy.exe
! if defined(USEMINGW32)
USE_ARG=-DUSEMINGW32=1
! else
USE_ARG=-DUSEMINGW64=1
! endif
# the following generates a correct exe, but with console!
CRT_STARTUP_CONSOLE=
CRT_STARTUP_NOCONSOLE=
LFLAGS_DLL=-g -shared
# -L$(MINGWDIR)\lib
LFLAGS_CONSOLE=-g
# -L$(MINGWDIR)\lib
LFLAGS_NOCONSOLE=-g -mwindows
# -L$(MINGWDIR)\lib
APP_RT_LIB=
#APP_IMPORTLIBS=$(MINGWLIBDIR)\libkernel32.a
APP_IMPORTLIBS=
! else
error error error
! endif
! endif
! endif
! endif
!endif
#slashified OUTDIR, because MIGNW does not handle backslashes correctly in a response file (sigh)
!if defined(USEMINGW32) || defined(USEMINGW64)
OUTDIR_SLASH=objmingw/
!else
OUTDIR_SLASH=$(OUTDIR)
!endif
STC_BINDIR=$(TOP)\stc
GENDATE_UTILITY=$(TOP)\librun\genDate.com
#
# give disjount base addresses
# (its not fatal, if libs overlap;
# however, startup time and sharability are affected if they do ...)
#
LIBORACLE_BASE =0x03d00000
LIBJAVA_BASE =0x04000000
LIBOPENGL_BASE =0x04400000
WORKFLOW_BASE =0x66000000
# 680000
# 7fffff
EXPECCO_BASE =0x67000000
# 807000
# dfffff
EXPECCOREPORT_BASE =0x67e00000
# 69000
# fffff
EXPECCOSTORAGE_BASE =0x67f00000
# 4C000
# 7ffff
EXEPT_PDF_BASE =0x67f80000
# 55000
# dffff
EXEPT_SIGNEDZIP_BASE =0x67fe0000
# E000
# 1ffff
DAPASX_BASE =0x66000000
LIBRUN_BASE =0x69000000
# 181000
# 2FFFFF
LIBSOAP_BASE =0x69300000
# 98000
# fffff space
# fffff end-addr
GOODIES_NET_BASE =0x69400000
# E7000
# 1fffff space
# 5fffff end-addr
GOODIES_AUTH_BASE =0x69600000
# 12000
# 3ffff space
# 3ffff end-addr
# **FREE** =0x69640000
#
# 3ffff space
# 7ffff end-addr
GOODIES_POSTSCRIPT_BASE =0x69680000
# 2A000
# 3ffff space
# Bffff end-addr
GOODIES_RDOIT_BASE =0x696C0000
# 17000
# 3ffff space
# fffff end-addr
GOODIES_COMM_BASE =0x69700000
# E1000
# 1fffff space
# 8fffff end-addr
LIBCOMPAT_BASE =0x69900000
# 4a000
# fffff space
# fffff end-addr
# **FREE** =0x69A00000
#
# 5fffff space
# Ffffff end-addr
LIBBASIC_BASE =0x6A000000
# 52b000
# bfffff space
LIBOSI_ASN1_BASE =0x6AC00000
# b7000
# fffff space
# fffff end-addr
LIBCRYPT_BASE =0x6AD00000
# 7B000
# fffff space
# fffff end-addr
LIBBASIC3_BASE =0x6AE00000
# b2000
# 1fffff space
# Ffffff end-addr
LIBVIEW_BASE =0x6B000000
# 25d000 used
# 6fffff space
# 6fffff end-addr
LIBVIEW2_BASE =0x6B700000
# 13e000
# 2fffff space
# 9fffff end-addr
LIBCOMP_BASE =0x6BA00000
# 138000
# 2fffff space
# cfffff end-addr
LIBBASIC2_BASE =0x6BD00000
# cd000
# 1fffff space
# efffff end-addr
LIBHTMLTREE_BASE =0x6BF00000
# ba000
# fffff space
# Ffffff end-addr
LIBTOOL_BASE =0x6C000000
# 623000 used
# Bfffff space
# Bfffff end-addr
LIBTOOL2_BASE =0x6CC00000
# 12c000 used
# 3fffff space
# Ffffff end-addr
LIBWIDG_BASE =0x6D000000
# 1f8000
# 4fffff
LIBWIDG2_BASE =0x6D500000
# 18a000
# 7fffff
LIBWEBSERVER_BASE =0x6D800000
# 15c000
# 3fffff
# Bfffff
LIBWIDG3_BASE =0x6DC00000
# 18000
# 3ffff
WINWORKSTAT_BASE =0x6DC40000
# 44000
# fffff
XWORKSTAT_BASE =0x6DD00000
# 3F000
# fffff
LIBUI_BASE =0x6DE00000
# c4000
# 1fffff
# Ffffff
LIBREGEX_BASE =0x6E800000
# 42000
# 7ffff
LIBXMLSTX_BASE =0x6E880000
# 16000
# 3FFFF
# bffff
LIBSOAP_XMLSIG_BASE =0x6E8C0000
# 17000
# 3FFFF
# fffff
LIBXMLVW_BASE =0x6E900000
# 79000
# fffff
LIBHTMLTREE_BASE =0x6EA00000
# AB000
# 1fFFFF
# Bfffff
LIBJAVASCRIPT_BASE =0x6EC00000
# 64000
# fffff
LIBODBC_BASE =0x6ED00000
# 4a000
# fffff
LIBBOSS_BASE =0x6EE00000
# 2d000
# 7ffff
LIBDB_BASE =0x6EE80000
# 1b000
# fffff
LIBHTML_BASE =0x6EF00000
# 82000
# fffff
LIB_RB_HELPERS_BASE =0x6f000000
# 2b000
# 7ffff
LIB_RB_CHANGES_BASE =0x6f080000
# 2F000
# bffff
LIB_XML_YAXO_BASE =0x6f0c0000
# 2F000
# fffff
LIB_RB_PARSER_BASE =0x6f100000
# 95000
# fffff
LIB_RB_REFACTORING_BASE =0x6f200000
# 9e000
# fffff
# 0x6f300000
!ifdef USEBC
MAKE_ZLIB_ARG= -f win32\Makefile.bor
MAKE_BZ2LIB_ARG= -f Makefile.bor
MAKE_FDMLIB_ARG= -f Makefile.bcc
!else
! ifdef USELCC
MAKE_ZLIB_ARG= -f win32\Makefile.lcc
MAKE_BZ2LIB_ARG= -f Makefile.lcc
MAKE_FDMLIB_ARG= -f Makefile.lcc
! else
! ifdef USEVC
MAKE_ZLIB_ARG= -f win32\Makefile.msvc
MAKE_BZ2LIB_ARG= -f Makefile.msvc
MAKE_FDMLIB_ARG= -f Makefile.msvc
! else
! ifdef USETCC
MAKE_ZLIB_ARG= -f win32\Makefile.tcc
MAKE_BZ2LIB_ARG= -f Makefile.tcc
MAKE_FDMLIB_ARG= -f Makefile.tcc
! else
! if defined(USEMINGW32) || defined(USEMINGW64)
MAKE_ZLIB_ARG= -f win32\Makefile.mingw
MAKE_BZ2LIB_ARG= -f Makefile.mingw
MAKE_FDMLIB_ARG= -f Makefile.mingw
! else
error error error
! endif
! endif
! endif
! endif
!endif
!ifdef LIB_BASE
! ifdef USEBC
LIB_BASE_LD_ARG=-b:$(LIB_BASE)
! endif
! ifdef USEVC
#LIB_BASE_LD_ARG=/BASE:$(LIB_BASE)
! endif
!endif
ZLIB_DIR=$(TOP)\support\zlib-1.2.3
ZLIB=$(OBJDIR)\zlib.lib
BZ2LIB_DIR=$(TOP)\support\bz2lib
BZ2LIB=$(BZ2LIB_DIR)\bz2lib.lib
#
# final destination directory for exe's and dll's
#
BINDIR=$(TOP)\projects\smalltalk
STX=$(BINDIR)\stx.com
#
# input/output directory for STX-includes
#
STX_INCDIR=$(TOP)\include
INCLUDE=$(STX_INCDIR)
INCL=$(TOP)\include\\
LIBRUN=$(LIBDIR)\librun.lib
# WINSOCK=wsock32
WINSOCK=ws2_32
WINSOCK_LIB=$(WINSOCK).lib
L_WINSOCK=-l$(WINSOCK)
!ifdef USEBC
# BORLAND
SYS_INCL=-I$(BCB)\include -I..\support\win32\include
OPENGL_INCLUDE=-I$(BCB)\include\gl
# Linker definition file for DLL's (generic)
DEF_FILE=$(TOP)\rules\bc_dll.def
SYSLIBDIR=$(BCB)\lib\release
IPHLPAPI_LIB=$(BCB)\lib\PSDK\iphlpapi.lib
!else
! ifdef USEVC
# VISUALC
SYS_INCL=-I"$(VCINSTALLDIR)\include" -I"$(SDK)Include" -I"$(SDK2)Include" -I"$(SDK3)Include" -I..\librun
SYS_INCL=-I"$(VCINSTALLDIR)\include" -I"$(SDK)Include" -I..\librun
SYS_INCL=-I"$(VCINSTALLDIR)\include" -I"$(SDK)Include" $(INCLUDE_WINDOWSKIT) -I..\librun
OPENGL_INCLUDE=-I$(SDK)\include\gl
DEF_FILE=$(TOP)\rules\vc_dll.def
SYSLIBDIR=$(SDK)lib\\
LINK32_LIBS=\
kernel32.lib \
user32.lib \
gdi32.lib\
shell32.lib\
comdlg32.lib \
ole32.lib \
oleaut32.lib \
advapi32.lib \
Mpr.lib \
uuid.lib \
iphlpapi.lib \
winmm.lib \
winspool.lib \
# wingdi.lib \
version.lib \
$(WINSOCK_LIB) \
"$(VCLIBDIR)oldnames.lib" \
# "$(VCLIBDIR)libcmt.lib" \
$(LOCALLIBS)
# LINK32_INCREMENTAL=/INCREMENTAL:yes
LINK32_FLAGS=\
$(LINK32_LIBS) \
$(LIBRUN) \
/NOLOGO \
/SUBSYSTEM:$(LIB_SUBSYSTEM) \
$(LINK32_INCREMENTAL) \
/PDB:$(OUTDIR)$(LIBNAME).pdb \
/DEBUG \
/DLL \
/DYNAMICBASE:NO \
/MACHINE:X86 \
/LARGEADDRESSAWARE \
/ERRORREPORT:PROMPT \
/OUT:$(OUTDIR)$(LIBNAME).dll
! else
! ifdef USELCC
# LCC
SYS_INCL=-I$(LCCDIR)\include
OPENGL_INCLUDE=-I$(LCCDIR)\include\gl
! else
! ifdef USETCC
# TCC
SYS_INCL=-I$(TCCDIR)\include
OPENGL_INCLUDE=-I$(TCCDIR)\include\gl
STC_CMD_OPT=-commonRefs
! else
! if defined(USEMINGW32) || defined(USEMINGW64)
# MINGW
SYS_INCL=-I$(MINGWDIR)\include
OPTIONAL_SUPPORT_XLIB_INCLUDE=-I$(TOP)\support\win32\include -I$(TOP)\support\win32\include\x11
OPENGL_INCLUDE=-I$(MINGWDIR)\include\gl
# STC_CMD_OPT=-commonRefs
! if defined(USEMINGW32)
L_WINSOCK=-lws2_32 -lwsock32
WINSOCK_LIB=
! else
L_WINSOCK=-lws2_32 -lwsock32
WINSOCK_LIB=
! endif
! else
error error error
! endif
! endif
! endif
! endif
!endif
STC=$(STC_BINDIR)\stc
STX_INCL=-I"$(STX_INCDIR)"
LIBINIT_FILE=$(OUTDIR_SLASH)ntLibInit.$(O)
SYS_LIBS=\
"$(SYSLIBDIR)kernel32.lib" \
"$(SYSLIBDIR)user32.lib" \
"$(SYSLIBDIR)gdi32.lib" \
"$(SYSLIBDIR)comdlg32.lib" \
"$(SYSLIBDIR)ole32.lib" \
"$(SYSLIBDIR)oleaut32.lib" \
"$(SYSLIBDIR)advapi32.lib" \
"$(SYSLIBDIR)Mpr.lib" \
"$(SYSLIBDIR)uuid.lib" \
"$(SYSLIBDIR)PSDK\iphlpapi.lib" \
"$(SYSLIBDIR)$(WINSOCK_LIB)" \
"$(SYSLIBDIR)version.lib" \
"$(SYSLIBDIR)libc.lib" \
"$(SYSLIBDIR)oldnames.lib"
SYS_LIB_FLAGS=\
-lkernel32 -luser32 -lgdi32 -lcomdlg32 -lole32 -loleaut32 -ladvapi32 \
-lMpr -luuid -liphlpapi $(L_WINSOCK) -lversion -lwinmm
! if defined(USEMINGW32) || defined(USEMINGW64)
ODBC32_LIB=-lodbc32
! else
ODBC32_LIB=odbc32.lib
! endif
INTDIR=.
#
# defaults ...
#
LIB_SUBSYSTEM=console
!if defined(USEMINGW32) || defined(USEMINGW64)
OPT_COMMON=-fPIC -fno-strict-aliasing -Wno-strict-aliasing -fno-stack-protector -ggdb3 -pipe -U_FORTIFY_SOURCE -D__USE_MINGW_ANSI_STDIO=0
! if defined(USEMINGW32)
#
# A horrible hack - on i686 St/X is known to crash when compiled with -O2.
# To circumvent this, compile 32bit version with -O0 which is known to work.
#
# Naturally, this is horrible hack, but in the past, people made so many "cool optimizations"
# in i686 only that they break with every new GCC (UB). There are so many it would
# take significant effort to clean up. And there's little gain from that as of today
# (Dec 2020).
#
# So, sorry for that, but:
#
OPT=$(OPT_COMMON) -O0
! else
OPT=$(OPT_COMMON) -O2
! endif
CFLAGS=$(OPT) $(CFLAGS1) $(CFLAGS2) $(LOCALINCLUDES) $(CLOCAL_INCL) $(CFLAGS_LOCAL)
!endif