--- a/xmlreaderimpl/support/expat-2.0.1/bcb5/README.txt Mon Jan 25 16:38:30 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,87 +0,0 @@
-
- Using a Borland compiler product
-
-The files in this directory support using both the free Borland command-line
-compiler tools and the Borland C++ Builder IDE. The project files have been
-tested with both versions 5 and 6 of the C++ Builder product.
-
- Using the free BCC32 command line compiler
-
-After downloading and installing the free C++ Builder commandline version,
-perform the following steps (assuming it was installed under C:\Borland\BCC55):
-
-1) Add "C:\Borland\BCC55\BIN" to your path
-2) Set the environment variable BCB to "C:\Borland\BCC55".
-3) edit makefile.mak: enable or comment out the appropriate commands under
- clean & distclean, depending on whether your OS can use deltree /y or
- del /s/f/q.
-
-After that, you should simply cd to the bcb5 directory in your Expat directory
-tree (same structure as CVS) and run "make all" or just "make".
-
- Naming
-
-The libraries have the base name "libexpat" followed optionally by an "s"
-(static) or a "w" (unicode version), then an underscore and optionally
-"mt" (multi-threaded) and "d" (dynamic RTL).
-
-To change the name of the library a project file produces, edit the project
-option source (see step 1 under Unicode below) and change the name contained in
-the PROJECT tag. In a make file, change the value assigned to the PROJECT
-variable. Also, the LIBRARY entry in the .def file has to be changed to
-correspond to the new executable name.
-
-
- Unicode Considerations
-
-There are no facilities in the BCB 5 GUI to create a unicode-enabled
-application. Fortunately, it is not hard to do by hand.
-
-1. The startup .obj system file must be changed to the unicode version.
- Go to Project|Edit Option Source, and scroll down to the ALLOBJ tag. Change
- c0x32.obj to c0x32w.obj. Editing this file can be quirky, but usually the
- following kludge will make the change stick. Close and save the file
- (CTRL-F4) then open the options dialog (CTRL-Shift-F11), then click OK on
- the dialog immediately without changing anything in it. If this doesn't work,
- you will have to close the project completely and edit the .bpr file by hand.
-
- If you are using a make file, just change the startup .obj file assigned
- to the ALLOBJ variable.
-
-2. Add the macro define XML_UNICODE_WCHAR_T. In the GUI that goes in the options
- dialog, Directories/Conditionals tab, in the Conditional define box. In a
- make file, put it in the USERDEFINES variable.
-
-3. Of course, your code has to be written for unicode. As a start, the "main"
- function is called "wmain". The tchar macros are an interesting way to
- write code that can easily switch between unicode and utf-8. If these macros
- are used, then simply adding the conditional define _UNICODE as well as
- XML_UNICODE_WCHAR_T will bring in the unicode versions of the tchar macros.
- Otherwise the utf-8 versions are used. xmlwf uses its own versions of the
- tchar macros which are switched on and off by the XML_UNICODE macro, which
- itself is set by the XML_UNICODE_WCHAR_T define.
-
- Threading
-
-The libexpat libraries are all built to link with the multi-threaded dynamic RTL's.
-That means they require CC32xxMT.DLL present on the installation target.
-To create single-threaded libs, do the following:
-
-1. The compiler option for multi-threading must be turned off. Following the
- instructions above to edit the option source, remove the -tWM option from
- the CFLAG1 tag. In a make file, remove it from the CFLAG1 variable.
-
-2. The single threaded RTL must be called. change the RTL in the ALLLIB tag or
- variable (GUI or makefile repectively) to the version without the "mt" in the
- name. For example, change cw32mti.lib to cw32i.lib.
-
- Static RTL's
-
-To build the libs with static RTL's do the following,
-
-1. For the static expatlibs, in the Tlib tab on the options dialog, uncheck the
- "Use dynamic RTL" box. For the dynamic expatlibs, in the Linker tab on the
- options dialog, uncheck "Use dynamic RTL". If you are using a make file,
- remove the _RTLDLL assignment to the SYSDEFINES variable, and change the RTL
- to the version without an "i" in the ALLLIB variable. For example,
- cw32mti.lib would become cw32mt.lib.