#
#

USEMINGW32=1

!include ..\..\..\rules\stdHeader_bc

#
# There are two options in making libm at fdlibm compile time:
#       _IEEE_LIBM      --- IEEE libm; smaller, and somewhat faster
#       _MULTI_LIBM     --- Support multi-standard at runtime by
#                           imposing wrapper functions defined in
#                           fdlibm.h:
#                               _IEEE_MODE      -- IEEE
#                               _XOPEN_MODE     -- X/OPEN
#                               _POSIX_MODE     -- POSIX/ANSI
#                               _SVID3_MODE     -- SVID
#
# Here is how to set up CFLAGS to create the desired libm at
# compile time:
#
#       CFLAGS = -D_IEEE_LIBM           ... IEEE libm (recommended)
#       CFLAGS = -D_SVID3_MODE  ... Multi-standard supported
#                                           libm with SVID as the
#                                           default standard
#       CFLAGS = -D_XOPEN_MODE  ... Multi-standard supported
#                                           libm with XOPEN as the
#                                           default standard
#       CFLAGS = -D_POSIX_MODE  ... Multi-standard supported
#                                           libm with POSIX as the
#                                           default standard
#       CFLAGS =                        ... Multi-standard supported
#                                           libm with IEEE as the
#                                           default standard
#
# NOTE: if scalb's second arguement is an int, then one must
# define _SCALB_INT in CFLAGS. The default prototype of scalb
# is double scalb(double, double)
#
OUTDIR=

INCL=

AR      = ar

# CC      = gcc

#
# Default IEEE libm
#
# CFLAGS  = -O $(INCL)

CHMOD   = chmod

CP      = cp

INCFILES = fdlibm.h

LDFLAGS =

LIB     = libfdm.lib

LIBS    =

RANLIB  = ranlib

RM      = del



src =   k_standard.c k_rem_pio2.c \
	k_cos.c k_sin.c k_tan.c \
	e_acos.c e_acosh.c e_asin.c e_atan2.c \
	e_atanh.c e_cosh.c e_exp.c e_fmod.c \
	e_gamma.c e_gamma_r.c e_hypot.c e_j0.c \
	e_j1.c e_jn.c e_lgamma.c e_lgamma_r.c \
	e_log.c e_log10.c e_pow.c e_rem_pio2.c e_remainder.c \
	e_scalb.c e_sinh.c e_sqrt.c \
	w_acos.c w_acosh.c w_asin.c w_atan2.c \
	w_atanh.c w_cosh.c w_exp.c w_fmod.c \
	w_gamma.c w_gamma_r.c w_hypot.c w_j0.c \
	w_j1.c w_jn.c w_lgamma.c w_lgamma_r.c \
	w_log.c w_log10.c w_pow.c w_remainder.c \
	w_scalb.c w_sinh.c w_sqrt.c \
	s_asinh.c s_atan.c s_cbrt.c s_ceil.c s_copysign.c \
	s_cos.c s_erf.c s_expm1.c s_fabs.c s_finite.c s_floor.c \
	s_frexp.c s_ilogb.c s_isnan.c s_ldexp.c s_lib_version.c \
	s_log1p.c s_logb.c s_matherr.c s_modf.c s_nextafter.c \
	s_rint.c s_scalbn.c s_signgam.c s_significand.c s_sin.c \
	s_tan.c s_tanh.c

obj =   $(OUTDIR)k_standard.$(O) $(OUTDIR)k_rem_pio2.$(O) \
	$(OUTDIR)k_cos.$(O) $(OUTDIR)k_sin.$(O) $(OUTDIR)k_tan.$(O) \
	$(OUTDIR)e_acos.$(O) $(OUTDIR)e_acosh.$(O) $(OUTDIR)e_asin.$(O) $(OUTDIR)e_atan2.$(O) \
	$(OUTDIR)e_atanh.$(O) $(OUTDIR)e_cosh.$(O) $(OUTDIR)e_exp.$(O) $(OUTDIR)e_fmod.$(O) \
	$(OUTDIR)e_gamma.$(O) $(OUTDIR)e_gamma_r.$(O) $(OUTDIR)e_hypot.$(O) $(OUTDIR)e_j0.$(O) \
	$(OUTDIR)e_j1.$(O) $(OUTDIR)e_jn.$(O) $(OUTDIR)e_lgamma.$(O) $(OUTDIR)e_lgamma_r.$(O) \
	$(OUTDIR)e_log.$(O) $(OUTDIR)e_log10.$(O) $(OUTDIR)e_pow.$(O) $(OUTDIR)e_rem_pio2.$(O) $(OUTDIR)e_remainder.$(O)  \
	$(OUTDIR)e_scalb.$(O) $(OUTDIR)e_sinh.$(O) $(OUTDIR)e_sqrt.$(O) \
	$(OUTDIR)w_acos.$(O) $(OUTDIR)w_acosh.$(O) $(OUTDIR)w_asin.$(O) $(OUTDIR)w_atan2.$(O) \
	$(OUTDIR)w_atanh.$(O) $(OUTDIR)w_cosh.$(O) $(OUTDIR)w_exp.$(O) $(OUTDIR)w_fmod.$(O) \
	$(OUTDIR)w_gamma.$(O) $(OUTDIR)w_gamma_r.$(O) $(OUTDIR)w_hypot.$(O) $(OUTDIR)w_j0.$(O) \
	$(OUTDIR)w_j1.$(O) $(OUTDIR)w_jn.$(O) $(OUTDIR)w_lgamma.$(O) $(OUTDIR)w_lgamma_r.$(O) \
	$(OUTDIR)w_log.$(O) $(OUTDIR)w_log10.$(O) $(OUTDIR)w_pow.$(O) $(OUTDIR)w_remainder.$(O) \
	$(OUTDIR)w_scalb.$(O) $(OUTDIR)w_sinh.$(O) $(OUTDIR)w_sqrt.$(O) \
	$(OUTDIR)s_asinh.$(O) $(OUTDIR)s_atan.$(O) $(OUTDIR)s_cbrt.$(O) $(OUTDIR)s_ceil.$(O) $(OUTDIR)s_copysign.$(O) \
	$(OUTDIR)s_cos.$(O) $(OUTDIR)s_erf.$(O) $(OUTDIR)s_expm1.$(O) $(OUTDIR)s_fabs.$(O) $(OUTDIR)s_finite.$(O) $(OUTDIR)s_floor.$(O) \
	$(OUTDIR)s_frexp.$(O) $(OUTDIR)s_ilogb.$(O) $(OUTDIR)s_isnan.$(O) $(OUTDIR)s_ldexp.$(O) $(OUTDIR)s_lib_version.$(O) \
	$(OUTDIR)s_log1p.$(O) $(OUTDIR)s_logb.$(O) $(OUTDIR)s_matherr.$(O) $(OUTDIR)s_modf.$(O) $(OUTDIR)s_nextafter.$(O) \
	$(OUTDIR)s_rint.$(O) $(OUTDIR)s_scalbn.$(O) $(OUTDIR)s_signgam.$(O) $(OUTDIR)s_significand.$(O) $(OUTDIR)s_sin.$(O) \
	$(OUTDIR)s_tan.$(O) $(OUTDIR)s_tanh.$(O)

all: $(LIB)

check:
	@echo This package does not have a validation suite.

clean:
	-$(RM) *.$(O) $(LIB)

distclean:      mostlyclean
	-$(RM) $(LIB)
	-$(RM) -r autom4te.cache/
	-$(RM) config.cache config.log config.status Makefile

install:        $(LIB) uninstall
	$(CP) $(LIB) $(prefix)/lib/$(LIB)
	$(CHMOD) 664 $(prefix)/lib/$(LIB)
	$(RANLIB) $(prefix)/lib/$(LIB) || true

$(LIB) : $(obj)
	-del $(LIB)
	$(AR) r $(LIB) $(obj)

maintainer-clean:       distclean
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."
	-$(RM) configure

mostlyclean:    clean
	-$(RM) $(obj)

source: $(src) README

uninstall:
	-$(RM) $(prefix)/lib/$(LIB)

.c.$(O):
	$(CC) $(CFLAGS) -c{ $<}