#------------------ start of rules/stdRules ---------------------

#

# $Header: /cvs/stx/stx/rules/stdRules,v 1.439 2017-02-21 17:10:56 cg Exp $

#

# MIMEType: application/x-make

#

# Notice: on systems where make does not support the include

# directive, this file is included as a whole into the generated

# Makefile, and the following comment applies:

#   these rules come from $(TOP)/rules/stdRules - do not change

#   anything below, the changes will be lost when Makefiles are

#   recreated.

# If the make command does support include, this file is

# referenced to by the generated Makefile with an include directive.

#

# Do not blame me about the complexity here - nowadays, I would use

# configure. But I am happy to have a setup which runs on all those wierd

# machines and have other things to do ...

#

# these rules enable the Makefiles to:

#

#     make mf                   -- recreate the makefile after a definition change

#

#     make Makefiles            -- recursively walk down and (re)create Makefiles

#

#     make depend               -- extract dependencies from ST sourcefiles

#                                  and replace BEGINMAKEDEPEND..ENDMAKEDEPEND

#                                  in Makefile

#

#     make check                -- syntax check all ST-files

#

#     make <Class>.check        -- check syntax of an individual ST-file

#

#     make debug                -- compile without -O / -g instead

#

#     make objs                 -- compile to all .o-files

#

#     make obj                  -- make a prelinked obj-library file

#

#     make clobber              -- remove all that can be reconstructed

#

#     make clean                -- remove all .o-files, but leave libraries and executables

#

#     make cleanjunk            -- clean junk (intermediate) files

#

#     make notes                -- for stc-developpers only

#                                  output notes about internal actions

#

#     make warnings             -- for stc-developpers only

#                                  output warning messages

#

#     make abbrev.stc           -- process local ST-files and collect

#                                  classname-to-filename abbreviations in

#                                  a local abbrev.stc file

#

#     make updAbbrev            -- merge all local abbreviations into the

#                                  global abbrev.stc file (in include/)

#

#     make rmLocalAbbrevs       -- remove all local abbreviations from the

#                                  global abbrev.stc file (in include/)

#

#     make collectAbbrev        -- recursively process all ST-files and collect

#                                  className-to-fileName abbreviations

#                                  in $(INCLUDE)/abbrev.stc

#                                  (i.e. a recursive updAbbrev)

#

# ---- internal rules

#

#     make newobj               -- make a prelinked obj-library file

#                                  including a classlibrary init-function

#

#     make sharedobj            -- make a prelinked shared obj-library file

#                                  including a classlibrary init-function

# controls if a 'lib' subdirectory is to be made

# when linking against shared objects

NO_LINK_LIBDIR="yes"

# redefinableAll: Makefile $(ALL_TARGET) postMake

redefinableAll: $(ALL_TARGET) postMake

postMake::

#

# notice: the rule below used to be the Makefile rule;

# however, since gmake automatically executes this rule upon entry,

# this may lead to trouble, if you are on an NFS mounted file system,

# and the machines times are not completely in sync (i.e. withing a second).

# To avoid endless make recursion, this rule is now called 'mf'

#

MAKEFILE=makefile

#MAKEFILE=makefile.gen

RELEASE=`cat $(TOP)/RELEASE`

MF=mf

.PHONY: $(MF) $(MF)_2 additionalMakefiles

#

# creates a Makefile from Make.proto, rules and configuration

#

$(MF): Make.proto $(RULEDIR)/stdHeader $(RULEDIR)/stdHeader2 $(RULEDIR)/stdRules \

		     $(CONFDIR)/COMMON/defines \

		     $(CONFDIR)/vendorConf \

		     $(CONFDIR)/myConf

	@-echo "making $(MAKEFILE) for $(CONF) $(CONF_PACKS) ..."

	@$(MAKE) additionalMakefiles

	@$(MAKE) $(MF)_2

additionalMakefiles::

$(MF)_2:

	@-rm -f $(MAKEFILE).bak

	@-mv $(MAKEFILE) $(MAKEFILE).bak

	@echo '#' > $(MAKEFILE)

	@echo '# DO NOT EDIT ' >> $(MAKEFILE)

	@echo '# automagically generated from Make.proto (by make mf)' >> $(MAKEFILE)

	@echo "#" >> $(MAKEFILE)

	@-if [ "$(MAKE_INCLUDE)" != "" ]; then \

	    echo "$(MAKE_INCLUDE) $(TOP)/rules/stdHeader" >>$(MAKEFILE); \

	else \

	    cat $(RULEDIR)/stdHeader >> $(MAKEFILE) ; \

	    echo "$(MAKEFILE):: $(TOP)/rules/stdHeader" >>$(MAKEFILE); \

	fi

	@-if [ -r $(CONFDIR)/COMMON/defines ]; then \

	  if [ "$(MAKE_INCLUDE)" != "" ]; then \

	    echo "$(MAKE_INCLUDE) $(TOP)/configurations/COMMON/defines" >> $(MAKEFILE); \

	  else \

	    cat $(CONFDIR)/COMMON/defines >> $(MAKEFILE); \

	    echo "$(MAKEFILE):: $(CONFDIR)/COMMON/defines" >>$(MAKEFILE); \

	  fi ;\

	fi

	@-if [ -r $(CONFDIR)/vendorConf ]; then \

	  if [ "$(MAKE_INCLUDE)" != "" ]; then \

	    echo "$(MAKE_INCLUDE) $(TOP)/configurations/vendorConf" >> $(MAKEFILE); \

	  else \

	    cat $(CONFDIR)/vendorConf >> $(MAKEFILE); \

	  fi ; \

	fi

	@-if [ -r $(CONFDIR)/myTools ]; then \

	  if [ "$(MAKE_INCLUDE)" != "" ]; then \

	    echo "$(MAKE_INCLUDE) $(TOP)/configurations/myTools" >> $(MAKEFILE); \

	  else \

	    cat $(CONFDIR)/myTools >> $(MAKEFILE); \

	  fi ;\

	else \

	  if [ "$(CONF_TOOLS)" != "" ]; then \

	    if [ -r $(CONFDIR)/COMMON/$(CONF_TOOLS) ]; then \

	      cat $(CONFDIR)/COMMON/$(CONF_TOOLS) >>$(MAKEFILE) ; \

	    fi ; \

	  fi ;\

	fi

	@-if [ "$(MAKE_INCLUDE)" != "" ]; then \

	  echo "$(MAKE_INCLUDE) $(TOP)/configurations/myConf"  >> $(MAKEFILE); \

	else \

	  cat $(CONFDIR)/myConf  >>$(MAKEFILE); \

	fi

	@-if [ -r $(CONFDIR)/myPack ]; then \

	  if [ "$(MAKE_INCLUDE)" != "" ]; then \

	    echo "$(MAKE_INCLUDE) $(TOP)/configurations/myPack" >> $(MAKEFILE); \

	  else \

	    cat $(CONFDIR)/myPack >> $(MAKEFILE); \

	    echo "$(MAKEFILE):: $(CONFDIR)/myPack" >>$(MAKEFILE); \

	  fi ;\

	else \

	    if [ "$(CONF_PACKS)" != "" ]; then \

		if [ -r $(CONFDIR)/PACKS/$(CONF_PACKS) ]; then \

		    cat $(CONFDIR)/PACKS/$(CONF_PACKS) >>$(MAKEFILE) ; \

		fi ;\

	    fi ;\

	fi

	@-if [ "$(MAKE_INCLUDE)" != "" ]; then \

	  echo "$(MAKE_INCLUDE) $(TOP)/rules/stdHeader2" >>$(MAKEFILE); \

	else \

	  cat $(RULEDIR)/stdHeader2         >>$(MAKEFILE); \

	  echo "$(MAKEFILE):: $(RULEDIR)/stdHeader2" >>$(MAKEFILE); \

	fi

	@-if [ -r Make.spec ]; then                    \

	  if [ "$(MAKE_INCLUDE)" != "" ]; then \

	    echo "$(MAKE_INCLUDE) Make.spec"  >> $(MAKEFILE); \

	  else \

	    cat Make.spec  >>$(MAKEFILE); \

	  fi; \

	fi

	@-if [ $$TOP"x" != "x" ]; then \

	    echo "TOP="$$TOP  >>$(MAKEFILE); \

	    sed '/^TOP=/d' < Make.proto > Make.proto.edit; \

	    cat Make.proto.edit >>$(MAKEFILE); \

	else \

	    if [ $(TOPOVERWRITE)"x" != "x" ]; then \

		echo "TOP="$(TOP) >>$(MAKEFILE);  \

		sed '/^TOP=/d' < Make.proto > Make.proto.edit; \

		cat Make.proto.edit >>$(MAKEFILE); \

	    else \

		if [ "$(MAKE_INCLUDE)" != "" ]; then \

		    echo $(MAKE_INCLUDE) Make.proto >>$(MAKEFILE); \

		else \

		    cat Make.proto >>$(MAKEFILE); \

		    echo "$(MAKEFILE):: Make.proto" >>$(MAKEFILE); \

		fi ;\

	    fi ;\

	fi

	@echo ""                           >>$(MAKEFILE)

	@echo "BASE_CONF="$(CONF)               >>$(MAKEFILE)

	@echo "BASE_CONF_VENDOR="$(CONF_VENDOR) >>$(MAKEFILE)

	@echo "CONF_PACKS="$(CONF_PACKS)   >>$(MAKEFILE)

	@echo "CONF_TOOLS="$(CONF_TOOLS)   >>$(MAKEFILE)

	@-if [ $$TOP"x" != "x" ]; then                  \

	    echo "TOP="$$TOP              >>$(MAKEFILE);        \

	    echo "TOPOVERWRITE="$$TOP     >>$(MAKEFILE);        \

	    echo "STC="stc                >>$(MAKEFILE);   \

	    echo "INCLUDE="$(INCLUDE)     >>$(MAKEFILE);        \

	    echo "INCLUDE_OUT="$(INCLUDE_OUT) >>$(MAKEFILE); \

	else                                            \

	    if [ $(TOPOVERWRITE)"x" != "x" ]; then      \

		echo "TOP="$(TOP)          >>$(MAKEFILE);  \

		echo "TOPOVERWRITE="$(TOP) >>$(MAKEFILE);  \

		echo "STC="stc             >>$(MAKEFILE);  \

		echo "INCLUDE="$(INCLUDE)  >>$(MAKEFILE);       \

		echo "INCLUDE_OUT="$(INCLUDE_OUT) >>$(MAKEFILE); \

	    fi;                                          \

	fi

	@echo ""                           >>$(MAKEFILE)

	@-if [ "$(MAKE_INCLUDE)" != "" ]; then \

	  echo "$(MAKE_INCLUDE) $(TOP)/rules/stdRules" >> $(MAKEFILE); \

	else \

	  cat $(RULEDIR)/stdRules           >>$(MAKEFILE); \

	  echo "$(MAKEFILE):: $(RULEDIR)/stdRules" >>$(MAKEFILE); \

	fi

	@-if [ "$(TOUCH)" != "echo" ]; then \

	    $(TOUCH) $(MAKEFILE); \

	fi

	@if [ "$(OTHER_MAKE_FILES)" != "" ]; then \

	    $(MAKE) $(OTHER_MAKE_FILES); \

	fi

# No longer -- dependencies, abbrev and libInit.stc

# are created by smalltalk!

#

#       @$(MAKE) depend MAKEFILE=$(MAKEFILE)

#       @-if [ "$(MAKE_NT_MAKEFILES)" = "yes" ]; then \

#           $(MAKE) nt.mak; \

#           $(MAKE) bmake.bat; \

#       fi

#       @-if [ "$(MAKE_VMS_MAKEFILES)" = "yes" ]; then \

#           $(MAKE) vms.mak; \

#       fi

#       @-if [ "$(SUPPRESS_LOCAL_ABBREVS)" = "" ]; then \

#           $(MAKE) updateAbbrev; \

#       fi

	#cp $(TOP)/rules/samples/Makefile .

#

# unconditionally makes a new makefile

#

makeMakefile:

	@echo "making $(MAKEFILE) for $(CONF) $(CONF_PACKS) ..."

	@echo "1b"

	@-rm -f $(MAKEFILE).bak

	@-mv $(MAKEFILE) $(MAKEFILE).bak

	@cat $(RULEDIR)/stdHeader       >$(MAKEFILE)

	@-if [ -r $(CONFDIR)/COMMON/defines ]; then \

	    cat $(CONFDIR)/COMMON/defines >> $(MAKEFILE); \

	fi

	@-if [ -r $(CONFDIR)/vendorConf ]; then \

	    cat $(CONFDIR)/vendorConf >> $(MAKEFILE); \

	fi

	@-if [ -r $(CONFDIR)/myTools ]; then \

	    cat $(CONFDIR)/myTools >> $(MAKEFILE); \

	fi

	@cat $(CONFDIR)/myConf  >>$(MAKEFILE)

	@-if [ -r $(CONFDIR)/myPack ]; then \

	    cat $(CONFDIR)/myPack >> $(MAKEFILE); \

	else \

	    if [ "$(CONF_PACKS)" != "" ]; then \

		if [ -r $(CONFDIR)/PACKS/$(CONF_PACKS) ]; then \

		    cat $(CONFDIR)/PACKS/$(CONF_PACKS) >>$(MAKEFILE) ; \

		fi; \

	    fi; \

	fi

	@cat $(RULEDIR)/stdHeader2         >>$(MAKEFILE)

	@-if [ -r Make.spec ]; then                    \

	    cat Make.spec                 >>$(MAKEFILE); \

	fi

	@cat Make.proto                    >>$(MAKEFILE)

	@echo ""                           >>$(MAKEFILE)

	@echo "BASE_CONF="$(CONF)               >>$(MAKEFILE)

	@echo "BASE_CONF_VENDOR="$(CONF_VENDOR) >>$(MAKEFILE)

	@echo "CONF_PACKS="$(CONF_PACKS)   >>$(MAKEFILE)

	@echo "CONF_TOOLS="$(CONF_TOOLS)   >>$(MAKEFILE)

	@-if [ $$TOP"x" != "x" ]; then \

	    echo "TOP="$$TOP          >>$(MAKEFILE);    \

	    echo "TOPOVERWRITE="$$TOP >>$(MAKEFILE);    \

	    echo "STC="stc            >>$(MAKEFILE);       \

	    echo "INCLUDE="$(INCLUDE)   >>$(MAKEFILE);  \

	    echo "INCLUDE_OUT="$(INCLUDE_OUT) >>$(MAKEFILE); \

	else                                            \

	    if [ $(TOPOVERWRITE)"x" != "x" ]; then      \

		echo "TOP="$(TOP)          >>$(MAKEFILE);       \

		echo "TOPOVERWRITE="$(TOP) >>$(MAKEFILE);  \

		echo "STC="stc             >>$(MAKEFILE);  \

		echo "INCLUDE="$(INCLUDE)   >>$(MAKEFILE); \

		echo "INCLUDE_OUT="$(INCLUDE_OUT) >>$(MAKEFILE); \

	    fi;                                          \

	fi

	@echo ""                           >>$(MAKEFILE)

	@cat $(RULEDIR)/stdRules         >>$(MAKEFILE)

	@-if [ "$(TOUCH)" != "echo" ]; then \

	    $(TOUCH) $(MAKEFILE); \

	fi

	@if [ "$(OTHER_MAKE_FILES)" != "" ]; then \

	    $(MAKE) $(OTHER_MAKE_FILES);          \

	fi

# No longer -- dependencies, abbrev and libInit.stc

# are created by smalltalk!

#

#        @-if [ "$(SUPPRESS_DEPEND)" = "" ]; then    \

#            $(MAKE) depend MAKEFILE=$(MAKEFILE); \

#        fi

#        @-if [ "$(MAKE_NT_MAKEFILES)" = "yes" ]; then \

#            $(MAKE) nt.mak;    \

#            $(MAKE) bmake.bat; \

#        fi

#        @-if [ "$(MAKE_VMS_MAKEFILES)" = "yes" ]; then \

#            $(MAKE) vms.mak;   \

#        fi

#        @-if [ "$(SUPPRESS_LOCAL_ABBREVS)" = "" ]; then \

#            $(MAKE) updateAbbrev; \

#        fi

#

# same, without make depend

#

qmakeMakefile:

	$(MAKE) makeMakefile SUPPRESS_DEPEND=y MAKEFILE=$(MAKEFILE)

#

# same - lazy of typing

#

qmf:    qmakeMakefile

# $(MAKEFILE): Make.proto

#       $(MAKE) mf

#

# recursively goes down SUBDIRS and creates Makefiles

#

Makefiles:: checkForSTC

	@echo "making Makefiles for $(CONF) $(CONF_PACKS) ..."

	@$(MAKE) Makefiles_2

Makefiles_2:

	@-if [ "$(ALLSUBDIRS)"x != x ]; then         \

	  $(MAKE) subMakefiles MAKEFILE=$(MAKEFILE); \

	fi

checkForSTC:

	@-if [ ! -f $(STC) ]; then \

	  (cd $(TOP)/stc && $(MAKE)); \

	fi

#

# same without make depend

#

qMakefiles::

	@-if [ "$(ALLSUBDIRS)"x != x ]; then                            \

	  $(MAKE) subMakefiles SUPPRESS_DEPEND=y MAKEFILE=$(MAKEFILE);  \

	fi

subMakefiles::

	@-for i in $(ALLSUBDIRS); do \

	  if [ -d $$i ]; then \

	   if [ -f $$i/Make.proto ]; then \

	     $(MAKE) subMakefile SUBDIR=$$i ; \

	   else \

	     echo "*** oops no Make.proto in directory $$i ?? (non fatal)"; \

	   fi; \

	  else \

	    echo "*** oops where is directory $$i ?? in "`pwd`" (non fatal)"; \

	  fi; \

	done

subMakefile::

	$(RULEDIR)/stmkmf --cd $(SUBDIR)

#

# sorry - the -nt operator is not available on most shells ... shame to them

#

# CHECKMAKEFILEISUPTODATE=checkMakefileIsUpToDate

checkMakefileIsUpToDate:

	@-if [ Make.proto -nt $(MAKEFILE) ]; then  \

	   $(MAKE) mf;                         \

	fi

#

# cross-make of makefiles & config files

# for systems with poor make/sed/awk etc. support

#

# bmake.bat:

#         @echo "mkdir objbc" > bmake.bat

#         @echo "make.exe -N -f nt.mak %1 %2" >> bmake.bat

bmake.bat:

	@echo "make.exe -N -f nt.mak %1 %2" >> bmake.bat

nt.mak: Make.proto $(TOP)/rules/stdRules

	@$(MAKE) SYSDEP_OBJS="$(WIN32_OBJS)" do_nt.mak

NT_ADDITIONAL_DEFS::

	@echo "#"

	@echo "# additional defines"

	@echo "#"

NT_ADDITIONAL_RULES::

	@echo "#"

	@echo "# additional rules"

	@echo "#"

do_nt.mak:

	@echo "making nt.mak from Make.proto ..."

	@echo '#' > nt_mak

	@echo '# DO NOT EDIT ' >> nt_mak

	@echo '# automagically generated from Make.proto (by make nt.mak)' >> nt_mak

	@echo "#" >> nt_mak

	@echo -n "TOP=" >> nt_mak

	@echo $(TOP) | sed -e 's:/:\\:g' >> nt_mak

	@echo "#" >> nt_mak

	@echo '!INCLUDE $$(TOP)\rules\'$(STDHEADER_NT) >> nt_mak

	@echo "#" >> nt_mak

	@-if [ "$(LIBNAME)" != "" ]; then \

	    echo "MODULE="$(MODULE) >> nt_mak; \

	    echo "MODULE_DIR="$(MODULE_DIR) >> nt_mak; \

	    echo "PACKAGE=$$"'('MODULE')'":$$"'('MODULE_DIR')' >> nt_mak; \

	    echo "LIBNAME="$(LIBNAME) >> nt_mak; \

	    if [ "$(NM_LIB_BASE)" != "" ]; then \

		echo "LIB_BASE=$$"'('$(NM_LIB_BASE)')' >> nt_mak; \

		echo '!ifdef USEBC' >> nt_mak; \

		echo "LIB_BASE_LD_ARG=-b:$$"'('$(NM_LIB_BASE)')' >> nt_mak; \

		echo '!endif' >> nt_mak; \

	    fi; \

	    echo LOCALINCLUDES='"'$(LOCALINCLUDES)'"' | sed -e 's:/:\\:g'  >> nt_mak; \

	    echo 'CLOCAL_INCL=$$(LOCALINCLUDES)' >>nt_mak; \

	    echo STCOPT='"'$(STCOPT)'"' >> nt_mak; \

	    echo 'STCLOCALOPT=-package=$$(PACKAGE) $$(COMMONSYMBOLS) $$(SEPINITCODE) $$(RELOCINSTVARS) -varPrefix=$$(LIBNAME) $$(LOCALINCLUDES)' >> nt_mak; \

	    echo '#STCLOCALOPT="'$(STCLOCALOPT)'"' >> nt_mak; \

	    echo >> nt_mak; \

	    echo 'ALL: $(NT_ADDITIONAL_ALL_TARGETS) $$(LIBDIR)\$$(LIBNAME).lib $$(BINDIR)\$$(LIBNAME).dll' >>nt_mak; \

	    echo >> nt_mak; \

	fi

	@$(MAKE) NT_ADDITIONAL_DEFS >> nt_mak

	@echo >> nt_mak

	@echo 'OBJS=\' >> nt_mak

	@for i in $(OBJS); do \

	  BASE=`basename $$i .$(O)`; \

	  W32BASE=`basename $$i .$(O)`_win32; \

	  W32ST=`basename $$i .$(O)`_win32.st; \

	  if [ -f $$W32ST ]; then \

	    BASE=$$W32BASE; \

	  fi; \

	  if [ "$$BASE" != "XWorkstation" ]; then \

	    if [ "$$BASE" != "GLXWorkstation" ]; then \

	      if [ "$$BASE" != "WinWorkstation" ]; then \

		echo '  $$(OUTDIR)'$$BASE'.$$(O)'" \\" >> nt_mak; \

	      fi; \

	    fi; \

	  fi; \

	done

	@echo >> nt_mak

	@echo >> nt_mak

	@echo '!INCLUDE $$(TOP)\rules\'$(STDRULES_NT) >> nt_mak

	@echo >> nt_mak

	@$(MAKE) NT_ADDITIONAL_RULES >> nt_mak

	@echo >> nt_mak

	@echo "# BEGINMAKEDEPEND --- do not remove this line; make depend needs it" >> nt_mak

	@for i in $(OBJS); do \

	  BASE=`basename $$i .$(O)`; \

	  W32BASE=`basename $$i .$(O)`_win32; \

	  W32ST=`basename $$i .$(O)`_win32.st; \

	  if [ -f $$W32ST ]; then \

	    BASE=$$W32BASE; \

	  fi; \

	  if [ "$$BASE" != "XWorkstation" ]; then \

	    if [ "$$BASE" != "GLXWorkstation" ]; then \

	      if [ "$$BASE" != "WinWorkstation" ]; then \

		echo '$$(OUTDIR)'$$BASE'.$$(O): '$$BASE'.st' >> nt_mak; \

	      fi; \

	    fi; \

	  fi; \

	done

	@echo "# ENDMAKEDEPEND --- do not remove this line" >> nt_mak

	@-if [ -f nt.mak ]; then \

	    mv nt.mak nt.mak.bak; \

	fi

	@$(MAKE) stDepend MAKEFILE=nt_mak

	@mv nt_mak nt.mak

nt.def: $(MAKEFILE) $(TOP)/rules/stdRules

	@echo "making nt.def from Make.proto ..."

	@echo 'LIBRARY '$(LIBNAME) > nt_def

	@echo 'CODE EXECUTE READ SHARED' >> nt_def

	@echo 'DATA READ WRITE' >> nt_def

	@echo 'SECTIONS' >> nt_def

	@echo '    INITCODE    READ EXECUTE SHARED' >> nt_def

	@echo '    INITDATA    READ WRITE' >> nt_def

	@echo '    RODATA      READ SHARED' >> nt_def

	@echo 'EXPORTS ' >> nt_def

	@echo '    _'$(LIBNAME)'_Init' >> nt_def

	@-mv nt.def nt.def.bak

	@mv nt_def nt.def

bc.def: $(MAKEFILE) $(TOP)/rules/stdRules

	@echo "making bc.def from Make.proto ..."

	@echo 'LIBRARY '$(LIBNAME) > bc_def

	@echo 'CODE PRELOAD MOVEABLE DISCARDABLE' >> bc_def

	@echo 'SEGMENTS' >> bc_def

	@echo '   INITCODE    PRELOAD DISCARDABLE' >> bc_def

	@echo 'EXPORTS ' >> bc_def

	@echo '    _'$(LIBNAME)'_Init   @1' >> bc_def

	@-mv bc.def bc.def.bak

	@mv bc_def bc.def

vms.mak: $(MAKEFILE) $(TOP)/rules/stdRules

	@$(MAKE) SYSDEP_OBJS="$(VMS_OBJS)" do_vms.mak