#

# $Header$

#

# -------------- no need to change anything below ----------

TOP=../..

SUBDIRS=

RCSSOURCES=*.rc patches Make.proto

LINKSOURCES=*.rc patches Make.proto

#

# other definitions to use for things compiled here

#

LOCALDEFS=-DDEBUG

# ST_LDFLAG=

#

# see COMMON/defines for what those XXX_LIB etc. are

#

# MINI_LIB        = libbasic, libcomp $(PRIVATELIBS)

# FUNDAMENTAL_LIB = above PLUS libview, libwidg

# DEVELOP_LIB     = above PLUS libtool

# STANDARD_LIB    = above PLUS libwidg2, libdbase

# EXTENDED_LIB    = above PLUS libwidg3

#

# this defines where the show starts

#

STARTUP_CLASS="Smalltalk"

STARTUP_SELECTOR="start"

#

# directories from which bitmap files in bitmap subdirectories are to be symlinked

# to the bitmaps subdirectory

#

BITMAPDIRS= \

	$(LIBBASIC2DIR) $(LIBVIEWDIR) $(LIBVIEW2DIR) $(LIBWIDGDIR) $(LIBWIDG2DIR) \

	$(LIBWIDG3DIR) $(LIBTABLEDIR) $(LIBTOOLDIR) $(CLIENTDIR)/[A-Z]*         \

	$(OTHERLIBDIRS)                                                         \

	$(TOP)/fileIn $(TOP)/fileIn/* $(TOP)/goodies                            \

	$(TOP)/goodies/* $(TOP)/goodies/*/*

#

# directories from which binary files are to be symlinked 

# to the binary subdirectory

#

BINARYDIRS= \

	$(LIBBASICDIR) $(LIBBASIC2DIR) $(LIBBASIC3DIR) $(LIBVIEWDIR) $(LIBVIEW2DIR) $(LIBWIDGDIR) \

	$(LIBWIDG2DIR) $(LIBWIDG3DIR) $(LIBTOOLDIR) $(CLIENTDIR)/[A-Z]*         \

	$(LIBCOMPDIR) $(LIBTABLEDIR) $(LIBCOMPATDIR) $(LIBPRODIR) $(OTHERLIBDIRS)   \

	$(TOP)/fileIn $(TOP)/libtomcat $(TOP)/goodies $(TOP)/goodies/*          \

	$(TOP)/goodies/*/* $(EXTRA_BINARYDIRS)

#

# directories from which source files are to be symlinked 

# to the source subdirectory

#

SOURCEDIRS= \

	$(LIBBASICDIR) $(LIBBASIC2DIR) $(LIBBASIC3DIR) $(LIBCOMPDIR) $(LIBVIEWDIR) $(LIBVIEW2DIR) \

	$(LIBWIDGDIR) $(LIBWIDG2DIR) $(LIBWIDG3DIR) $(LIBTOOLDIR) $(CLIENTDIR)/[A-Z]* \

	$(LIBTABLEDIR) $(LIBUIDIR) $(LIBCOMPATDIR) $(LIBPRODIR) $(OTHERLIBDIRS)     \

	$(TOP)/fileIn $(TOP)/libtomcat $(TOP)/goodies $(TOP)/goodies/*           \

	$(TOP)/goodies/*/*

#

# including your own private lib in the make process and executable:

#

# for example, if you have a libprivate directory,

# where libprivate.obj is built, and that one should be included,

# add lines as below to your configuration/.../defines file:

#    PRIVATEOBJ=$(TOP)/libprivate/libprivate.obj

#    PRIVATE_SO=$(TOP)/libprivate/libprivate.so

#    PRIVATELIBS=libprivate

# ---------------------- end additional stuff --------------------

#

# default target: create the TARGET (usually smalltalk),

#                 create subdirectories with source-links, bitmap-links and resource-links

#

all::       $(TARGET)$(TARGET_RULE_EXTENSION) symlinks

#

# same, force recreation of link-directories

#

allNew:     $(TARGET)$(TARGET_RULE_EXTENSION) newResources styles newSource newBitmaps binary newInclude misc

#

# create symbolic links to sources, resources etc.

# normally (on an end-user system) these should go into usr/local/lib/smalltalk

#

symlinks:   resources styles newSource bitmaps binary includeLink misc

#

# the standard smalltalk executable:

# basic classes + view & widgets + tools + persistency

#

xsmalltalk:  $(TARGET)

smalltalk:: $(TARGET)$(TARGET_RULE_EXTENSION)

smalltalk_static:

	    @echo "making statically linked smalltalk ..."

	    @$(MAKE) linkIt LIBOBJS="$(LIBOBJS)" EXTRA_OBJ="$(EXTRA_OBJ)" LIBLIST="$(LIBLIST)"

smalltalk_shared:

	    @echo "making shared library linked smalltalk ..."

	    @$(MAKE) linkIt LIBOBJS="$(LIBOBJS)" EXTRA_OBJ="$(EXTRA_OBJ)" LIBLIST="$(LIBLIST)"

#

# a "smaller" smalltalk (does not include development classes)

#

smalltalk_exec:

	    -rm modulList.stc

	    @$(MAKE) modulList.stc \

			      EXTRA_CLASSES="$(EXTRA_CLASSES) DebugView" \

			      EXTRA_OBJ="$(EXTRA_OBJ) $(LIBTOOLDIR)/DebugView$(BIN_O)" \

			      LIBLIST="$(FUNDAMENTAL_LIST)"

	    @$(MAKE) smalltalk \

			      LIBLIST="$(FUNDAMENTAL_LIST)" \

			      EXTRA_CLASSES="$(EXTRA_CLASSES) DebugView" \

			      EXTRA_OBJ="$(EXTRA_OBJ) $(LIBTOOLDIR)/DebugView$(BIN_O)" \

			      LIBOBJS="$(FUNDAMENTAL_LIB)"

	    if [ ! -f binary/DebugView$(BIN_O) ]; then \

		(cd binary ; ln -s ../../../libtool/DebugView.so .); \

	    fi

$(LIBTOOLDIR)/DebugView.so:

	    (cd $(LIBTOOLDIR) ; $(MAKE) DebugView.so)

$(LIBTOOLDIR)/DebugView.o:

	    (cd $(LIBTOOLDIR) ; $(MAKE) DebugView.o)

$(LIBVIEWDIR)/XWorkstat.o:

	    (cd $(LIBVIEWDIR) ; $(MAKE) XWorkstat.o)

$(LIBVIEWDIR)/XWorkstat.so:

	    (cd $(LIBVIEWDIR) ; $(MAKE) XWorkstat.so)

$(LIBVIEWDIR)/GLXWorkstat.o:

	    (cd $(LIBVIEWDIR) ; $(MAKE) GLXWorkstat.o)

$(LIBVIEWDIR)/GLXWorkstat.so:

	    (cd $(LIBVIEWDIR) ; $(MAKE) GLXWorkstat.so)

$(LIBCOMPDIR)/ObjFLoader.o:

	    (cd $(LIBCOMPDIR) ; $(MAKE) ObjFLoader.o)

$(LIBCOMPDIR)/ObjFLoader.so:

	    (cd $(LIBCOMPDIR) ; $(MAKE) ObjFLoader.so)

#

# make list of classes for a standard smalltalk

# (includes basic, view & widgets and Persistency)

#

BASICLIST:   $(CLASSLISTS)

	    -cat $(CLASSLISTS) > $(CLASSLIST)

#

# dont want these ttt-tempfile abbrevs to be included ...

#

abbrev.stc::

	    @-rm -f ttt*.*

#

# dont want local abbrevs to be included ...

#

collectAbbrev::

	    @-rm -f abbrev.stc

#

# make a new source subdirectory

# the source directory consists of sym-links to all .st files we find

#

newSource:

	    -rm -rf source

	    @-$(MAKE) sourceLink

Source:     source

source:     

	    @-$(MAKE) sourceLink

sourcelink::  sourceLink

#

# make a new include subdirectory and link to abbreviation file

newInclude:

	    -rm -rf include

	    @-$(MAKE) includeLink

includelink:: includeLink

includeLink:

	    @-rm -f ttt*.H

	    @-if [ ! -d include ]; then                                 \

		mkdir include;                                  \

	    fi

	    @-if [ ! -r include/abbrev.stc ]; then                      \

		if [ -f $(INCLUDE)/abbrev.stc ]; then                   \

		    echo "linking abbrev.stc ...";                      \

		    (cd include; $(LNS) ../$(INCLUDE)/abbrev.stc .);    \

		else                                                    \

		    echo "oops - no $(INCLUDE)/abbrev.stc";             \

		fi                                                      \

	    fi

	    @-if [ ! -r include/liblist.stc ]; then                     \

		if [ -f $(INCLUDE)/liblist.stc ]; then                  \

		    echo "linking liblist.stc ...";                     \

		    (cd include; $(LNS) ../$(INCLUDE)/liblist.stc .);   \

		else                                                    \

		    echo "oops - no $(INCLUDE)/liblist.stc";            \

		fi                                                      \

	    fi

	    @-if [ ! -r include/symbols.stc ]; then                     \

		if [ -f $(INCLUDE)/symbols.stc ]; then                  \

		    echo "linking symbols.stc ...";                     \

		    (cd include; $(LNS) ../$(INCLUDE)/symbols.stc .);   \

		fi                                                      \

	    fi

	    @-rm -f include/RCS include/CVS

misc:       examples

examples:

	    -mkdir examples examples/3D

	    -(cd examples/3D; $(LNS) ../../$(TOP)/clients/GLdemos/*.data .)

#

# make a new binary subdirectory

# (this is only useful on systems that support dynamic loading;

#  autoloaded classes will then be loaded from machine code files

#  instead of source)

#

newBinary:

	    -rm -rf binary

	    @-$(MAKE) binaryLink

binary:

	    @-$(MAKE) binaryLink

binarylink:: binaryLink

#

# make a new bitmaps subdirectory

# (simply collect the contents of all bitmap directories)

#

newBitmaps:

	    -rm -rf bitmaps

	    @-$(MAKE) bitmaps

Bitmaps:    bitmaps

bitmaps:    

	    @-$(MAKE) bitmapLink

bitmaplink:: bitmapLink

#

# clean out intermediate chunk

#

cleanjunk::

	    -rm -f a.out changes SymbolTable ttt main.c

	    -rm -f classList.c fclassList.c nxclassList.c basicclassList.c

	    -rm -f betaclassList.c miniList.c tinyList.c

	    -rm -f pers* pers2 data data2 data.boss tetris.scores

cleanlinks:

	    -rm -rf source bitmaps binaries resources examples include

#

# clean out all that is not needed to run smalltalk

#

clean::

	    -rm -f a.out changes SymbolTable ttt main.c

	    -rm -f classList.stc classList.c classList.o

	    -rm -f fclassList.stc fclassList.c

	    -rm -f nxclassList.stc nxclassList.c

	    -rm -f basicclassList.stc basicclassList.c

	    -rm -f betaclassList.stc betaclassList.c

	    -rm -f miniList.stc miniList.c

	    -rm -f tinyList.stc tinyList.c

	    -rm -f pers pers2 data data2 data.boss tetris.scores

	    -rm -f st.img st2.img

	    -rm -f .stx*.mem

#

# clean out all that can be regenerated

#

clobber::

	    -rm -rf resources source binary bitmaps changes include examples

	    -rm -f smalltalk minitalk tinytalk st.img

	    -rm -f main.o

#

# make a new resources subdirectory

#

newResources:

	    rm -rf resources

	    @$(MAKE) resources styles

resources: 

	    -mkdir resources

	    @$(MAKE) resourceLink

resourcelink: resourceLink

resourceLink: 

	    @-if [ "`echo $(LIBBASICDIR)/resources/*`" != '$(LIBBASICDIR)/resources/*' ]; then \

		echo "linking resource files from $(LIBBASICDIR) ...";                        \

		(cd resources; $(LNS) ../$(LIBBASICDIR)/resources/* .);                       \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

	    @-if [ "`echo $(LIBVIEWDIR)/resources/*`" != '$(LIBVIEWDIR)/resources/*' ]; then   \

		echo "linking resource files from $(LIBVIEWDIR) ...";                         \

		(cd resources; $(LNS) ../$(LIBVIEWDIR)/resources/* .);                        \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

	    @-if [ "`echo $(LIBVIEW2DIR)/resources/*`" != '$(LIBVIEW2DIR)/resources/*' ]; then \

		echo "linking resource files from $(LIBVIEW2DIR) ...";                        \

		(cd resources; $(LNS) ../$(LIBVIEW2DIR)/resources/* .);                       \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

	    @-if [ "`echo $(LIBWIDGDIR)/resources/*`" != '$(LIBWIDGDIR)/resources/*' ]; then   \

		echo "linking resource files from $(LIBWIDGDIR) ...";                         \

		(cd resources; $(LNS) ../$(LIBWIDGDIR)/resources/* .);                        \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

	    @-if [ "`echo $(LIBWIDG2DIR)/resources/*`" != '$(LIBWIDG2DIR)/resources/*' ]; then \

		echo "linking resource files from $(LIBWIDG2DIR) ...";                        \

		(cd resources; $(LNS) ../$(LIBWIDG2DIR)/resources/* .);                       \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

	    @-if [ "`echo $(LIBWIDG3DIR)/resources/*`" != '$(LIBWIDG3DIR)/resources/*' ]; then \

		echo "linking resource files from $(LIBWIDG3DIR) ...";                        \

		(cd resources; $(LNS) ../$(LIBWIDG3DIR)/resources/* .);                       \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

	    @-if [ "`echo $(LIBTOOLDIR)/resources/*`" != '$(LIBTOOLDIR)/resources/*' ]; then   \

		echo "linking resource files from $(LIBTOOLDIR) ...";                         \

		(cd resources; $(LNS) ../$(LIBTOOLDIR)/resources/* .);                        \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

	    @-if [ "`echo $(LIBTABLEDIR)/resources/*`" != '$(LIBTABLEDIR)/resources/*' ]; then \

		echo "linking resource files from $(LIBTABLEDIR) ...";                        \

		(cd resources; $(LNS) ../$(LIBTABLEDIR)/resources/* .);                       \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

	    @-if [ "`echo $(TOP)/fileIn/resources/*`" != '$(TOP)/fileIn/resources/*' ]; then   \

		echo "linking resource files from $(TOP)/fileIn ...";                         \

		(cd resources; $(LNS) ../$(TOP)/fileIn/resources/* .);                        \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

	    @-if [ "`echo $(CLIENTDIR)/*/resources/*`" != '$(CLIENTDIR)/*/resources/*' ]; then \

		echo "linking resource files from $(CLIENTDIR) ...";                          \

		(cd resources; $(LNS) ../$(CLIENTDIR)/*/resources/* .);                       \

		rm -f resources/RCS resources/CVS;                                            \

	    fi

styles:     resources

	    @-echo "linking style files from $(LIBVIEWDIR)/styles ..."

	    @-rm -f resources/*.style resources/*.common

	    @-(cd resources; $(LNS) ../$(LIBVIEWDIR)/styles/* .)

	    @rm -f resources/RCS resources/CVS

main.o::    $(INCLUDE)/stc.h $(INCLUDE)/stcIntern.h Makefile

#

# installation rules

#

install:: installThis

#

# install binary only

#

binInstall::

	-mkdir $(DESTLIBDIR)

	-mkdir $(DESTBINDIR)

	 $(INSTALL) smalltalk $(DESTBINDIR)

	-strip $(DESTBINDIR)/smalltalk

#

# install all local stuff

#

# notice the [x-y]* patterns; some unixes (at&t) dont like too many arguments ...

#

installThis::

	-mkdir $(DESTLIBDIR)

	-mkdir $(DESTBINDIR)

	 $(INSTALL) smalltalk $(DESTBINDIR)

	-strip $(DESTBINDIR)/smalltalk

	-mkdir $(DESTLIBDIR)/source

	-chmod a+rx $(DESTLIBDIR)/source

	-cp source/[A-G]* $(DESTLIBDIR)/source

	-cp source/[H-P]* $(DESTLIBDIR)/source

	-cp source/[Q-Z]* $(DESTLIBDIR)/source

	-chmod a+r $(DESTLIBDIR)/source/[A-G]*

	-chmod a+r $(DESTLIBDIR)/source/[H-P]*

	-chmod a+r $(DESTLIBDIR)/source/[Q-Z]*

	-mkdir $(DESTLIBDIR)/bitmaps

	-chmod a+rx $(DESTLIBDIR)/bitmaps

	-cp bitmaps/[A-I]* $(DESTLIBDIR)/bitmaps

	-cp bitmaps/[J-Z]* $(DESTLIBDIR)/bitmaps

	-cp bitmaps/[a-i]* $(DESTLIBDIR)/bitmaps

	-cp bitmaps/[j-z]* $(DESTLIBDIR)/bitmaps

	-chmod a+r $(DESTLIBDIR)/bitmaps/[A-I]*

	-chmod a+r $(DESTLIBDIR)/bitmaps/[J-Z]*

	-chmod a+r $(DESTLIBDIR)/bitmaps/[a-i]*

	-chmod a+r $(DESTLIBDIR)/bitmaps/[j-z]*

	-chmod a+rx $(DESTLIBDIR)/resources

	-mkdir $(DESTLIBDIR)/resources

	-cp resources/* $(DESTLIBDIR)/resources

	-chmod a+r $(DESTLIBDIR)/resources/*.rs

	-cp *.rc *.stc patches $(DESTLIBDIR)

	-chmod a+r $(DESTLIBDIR)/*.rc $(DESTLIBDIR)/*.stc $(DESTLIBDIR)/patches

qinstall:: installThis